1、 Alkyd varnish
Product presentation：It is a kind of one component varnish based on long oil alkyd resin.The paint film is flexible, convenient for usage, with good luster and weather resistance.
Recommended Applications：It is suitable as a top coat for indoor and outdoor steel structures and wood surfaces in mild to moderate corrosive environments.
Physical parameter： Color Transparent, no mechanical impurities
Flash point 33℃
Solid content 28％
Specific gravity 0.95㎏/L
Theoretical coverage 14.7㎡/㎏(as 20un Dry film calculation)
Surface treatment：All surfaces must be clean, dry and free of contaminants.
Execution conditions：The construction surface must be clean and dry, the relative humidity is less than 80%, and the temperature is higher than the dew point by more than 3 ℃ to avoid condensation. It must be ventilated during construction and drying in a narrow space.
Construction parameters：
Construction methods airless spraying air spraying brush coating
thinner thinner thinner
（ MAX，Mass） 5％ 15％～20% 5％
Intake pressure 0.3～0.6MPa 0.3～0.6MPa
Nozzle pressure 15MP
（150kgf／cm2）
Drying time：Factors such as ventilation, temperature, paint film thickness, and number of coating tracks all affect drying time. The typical data listed in the table below are based on the following conditions：
*Good ventilation (outdoor or natural air circulation)
*The film thickness is measured in 20 microns
*Single layer of coating on an inert substrate
substrate temperature 0℃ 5℃ 10℃ 23℃ 40℃
Dry to tough （h） 36 20 10 6 4
Dry through (h) 90 48 24 18 12
Minimum coating time(h) 90 48 24 18 12
Maximum coating time1(d)
1.There is no silting and other contaminants on the coating surface. If necessary, remove the silting layer with sandpaper and fluff before coating.
The above data are for guidance only.The actual drying time/time interval before coating can be long or short, depending on paint film thickness, ventilation, humidity, underpainting, early loading and unloading requirements and mechanical strength, etc.
Supporting：
Y53-33 oil rust prevention paint or alkyd rust prevention paint of various colors: 2×40 microns (dry film thickness)
C04-42 colored alkyd enamel: 2×30 micron (dry film thickness)
C01-1 alkyd varnish: 1×20 micron (dry film thickness)
Other supporting facilities can be formulated according to specific conditions
Storage：According to HG/T2458, it should be stored in a dry, ventilated, cool and cool environment away from fire and heat source. The effective storage period is one year.It can only be used after passing the storage period.
Package：The 16-liter container load 13 kilograms
Safe：
The general measures for the use of this product are
(a) take appropriate precautions to avoid contact with paint on the skin and eyes (e.g. wear gloves)
Eyepiece, mask, protective oil, etc.
(b) maintain good ventilation.
(c) if the skin is contaminated with paint, apply soap or an appropriate industrial cleanser and a large amount of cleansing
Rinse water.
(d) as these products contain flammable substances, they should be kept away from the source of fire and fireworks are strictly prohibited.
(e) comply with the safety instructions as shown in the paint.
For health and safety details and precautions of using this product, please refer to the "safety technical manual" of the company.
Tel: +86-533-6120699 
Email:
manager@honrel.com
